Job Postings

Job Summary:

Operate industrial trucks equipped to move materials around a warehouse, storage yard or factory in a safe, efficient manner to meet the customers’ (internal or external) delivery expectations.

Summary of Essential Job Functions:

• Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, hoists, or elevating platforms, to load, unload, transport, or stack material.
• Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and complete delivery.
• Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other transport vehicles.
• Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
• Weigh materials or products and record weight or other production data on tags or labels.
• Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging batteries, fueling, or replacing liquefied-gas tank.
• Move controls to drive gasoline- or electric-powered trucks, cars, or tractors and transport materials between loading, processing, and storage areas.
• Communicate with others to coordinate material handling or other movement.
• Operate cranes, hoist or other moving or lifting equipment.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Minimum Requirements:

• A high school education or equivalent
• Forklift Operator certificate or satisfactory completion of a forklift training program is required within the first 30 days of employment for both sit-down, as well as stand-up lifts.
• Prefer six (6) months warehousing and inventory experience.
• Prefer six (6) months experience operating a forklift and/or stand-up lift.
• Physical ability to mount/dismount forklift through the duration of the shift which requires bending, stretching, stepping, reaching, climbing and stooping, as well as standing, walking, crouching and lifting up to fifty (50) pounds
• Ability to follow work procedures and safety rules.
• Ability to read, understand and follow directions/instructions
• Ability to use automated inventory control equipment.

Identified candidates must be able to the scheduled shift, as well as work overtime (daily, weekends and holidays) as business conditions dictate.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Maintenance Technician I - 2nd Shift to our team to support our continued growth.

This is a full-time position-based Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 2nd Shift: Monday - Friday, 2:00pm - 10:00pm

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• $1.50/hr shift premium (2nd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a maintenance position
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES:

• Perform simple-to-complex duties to install and maintain production machines and the plant facilities’ equipment.
• Provide assistance for emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
• Perform electrical duties including, but not limited to PLCs, reading and interpreting electrical drawings and schematics; Working with 120v, 220v, 480v and 13.8k volt circuits; Installing/repairing and trouble-shooting starters, relays, switches, proximity circuits, variable frequency drives (VFD), contactors and input/output circuits.
• Perform mechanical tasks including, but not limited to, mechanical, pneumatic, hydraulic, troubleshooting and repair of production machines.
• Read and interpret equipment manuals and work orders to perform required maintenance and service.
• Perform simple machinist duties and responsibilities.
• Perform simple to complex fabrication projects which typically involving welding components together.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Perform a variety of plumbing maintenance and carpentry functions.
• Perform aerial tasks using a scissor lifts, baskets and booms.
• Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Detect faulty operations, defective material and report those and any unusual situations to proper supervision.
• Experience reading and interpreting Blueprints, electrical schematics and technical manuals.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Minimum Requirements

• Requires a high school diploma/GED and experience in Industrial Maintenance, or an equivalent number of years of education and production maintenance experience.
• Journeyman Card or associate degree in mechanical, electrical, or industrial maintenance is a plus.
• 5+ years of progressive industrial experience in the following: electronics, hydraulics, pneumatics, mechanical and industrial skills.
• Must be highly motivated and able to work independently.
• Must be able to lift and move objects up to 50 pounds consistently with heavier weight necessary at times.
• Meet or exceed the job requirements of the job.
• Must have valid drivers' license and be insurable thru company insurance.
• Identified candidates must be able to work overtime (daily, weekends and holidays).
• Willing and able to have a flexible work schedule to meet company needs based on machine downtime, installation projects, etc.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Repair Welder to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically

• 3rd Shift: Sunday - Thursday, 10:00pm - 6:00am

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• $1.00/hr shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k plan
• Full benefits (medical/dental/vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience working with robotic welders
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES:

· Providing support in operations as a Repair Welder which can include duties such as:

· Setup welding equipment and supplies before executing the job orders; test and measure finished products.

· Operate equipment safely and effectively for welding.

· Stop to make minor repairs of welding machinery when product or machines or not to standard.

· Provide sufficient quantity of repaired parts to ensure delivery schedules are sustained.

· Demonstrates continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly.

· Maintaining a clean and orderly work environment and adhering to industry regulations.

· Handle time accounting and complete work order.

· Respond to warning signals and alarms that indicate issues have arisen, taking all necessary precautions to prevent accidents or injuries.

· Regulate or turn off machines in emergency situations and follow all instructions from supervisory staff quickly and precisely.

· Follow all necessary regulations and appropriate Company procedures including quality policies, safety policies, OSHA, EPA, ASME, NEC, etc. standards.

· Identify and report unsafe operations to Supervisor immediately.

MINIMUM REQUIREMENTS:

· Required – High School Diploma or GED equivalent.

· Prefer 2 years of experience MIG and/or TIG welding steel and galvanized steel.

· Prefer 2 years of experience operating hand and power tools.

· Aptitude in spatial reasoning, attention to detail, and skilled craftsmanship.

· Mechanical aptitude and experience (work with machines and general tooling).

· Skilled in hand and power tool usage.

· Ability to follow proper safety procedures.

· Proactive and takes ownership to resolve problems and issues.

· Ability to work with employees from many different cultures and backgrounds.

· Preference will be given to qualified local candidates.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Weld Operators to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 1st shift Monday – Friday 6:00AM – 2:00PM
• 2nd shift Monday – Friday 2:00PM – 10:00PM
• 3rd shift Sunday - Thursday 10:00PM - 6:00 AM

*Must be available to work overtime (daily, weekend & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• $1.50 shift premium (2nd shift)
• $1.00 shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES:

• Start machines, monitor their operation to ensure it is processing properly, and record operational data for material tracking and record number of pieces produced with other documentation to run the machine.
• Operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal material.
• Load work pieces into machines.
• Examine and inspect completed work pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
• Read production schedules to determine specifications, such as materials to be used to be compliant with customer specifications relative to dimensions and tolerances.
• Verify and document dimensions of finished parts for conformance to specifications, using measuring instruments, including but not limited to calipers, gauge blocks, micrometers, and dial indicators.
• Assist in completing simple to intermediate tasks associated with coil and die changes.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Minimum Requirements:

• Must be at least 18 years of age.
• High School Diploma or equivalent.
• Eligible to work in the United States.
• Must be able to satisfactorily complete pre-employment screening (background check and drug screen).
• Identified candidates must be able to work overtime (daily, weekends and holidays).
• Experience operating large industrial equipment is preferred.
• Must be able to work in a dynamic and fast paced environment.
• Report to work on time to support production startup.
• Possess good physical stamina and coordination.
• Must be able to stand, stoop, kneel, crouch or climb for extended periods of time.
• Must be able to lift/push/pull objects that are up to 50 pounds.
• work as a team, good communication skills, basic math skills, physical dexterity.

Toledo Tool & Die is an equal opportunity employer.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Weld Technicians to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically

• 1st Shift: Monday - Friday, 6:00am - 2:00pm
• 2nd Shift: Monday - Friday, 2:00pm - 10:00pm
• 3rd Shift: Monday - Friday, 10:00pm - 6:00am

*Must be available to work overtime (daily, weekends & some holidays)*

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• $1.50/hr shift premium (2nd shift)
• $1.00/hr shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k plan
• Full benefits (medical/dental/vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience working with robotic welders
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES:

• Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies
• Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
• Correct problems by adjusting controls or by stopping machines and opening holding devices.
• Give directions to other workers regarding machine set-up and use
• Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
• Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
• Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
• Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
• Start, monitor, and adjust robotic welding production lines.
• Modify computer-controlled robot movements.
• Perform preventive or corrective maintenance on robotic systems or components.
• Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
• Develop robotic path motions to maximize efficiency, safety, and quality.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Minimum Requirements

• Prefer at least two (2) years of progressive weld experience (MIG, TIG, etc…)
• Prefer at least one (1) year of progressive robotic experience (programming, adjustments, etc..)
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
• Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
• Meet or exceed the job requirements of the job.
• Identified candidates must be able to work overtime (daily, weekends and holidays).

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool Room Supervisor to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

JOB SUMMARY

Directly supervises and coordinates the activities of Tool & Die Department; plans and assigns work, implements policies and procedures and recommends improvements in Die Repair methods, equipment, operating procedures and working conditions.

Come join our team! Hours for this position are typically:

• Sunday - Thursday 10:00 PM - 6:00 AM

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Competitive pay
• $1.00 shift premium
• Weekly pay
• 10 paid holidays
• Full benefits

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES

• Recommend or implement measures to motivate employees and to improve safety, production methods, equipment performance, product quality, or efficiency.
• Enforce safety regulations.
• Manages Departmental performance measures, including visual controls and provides regular progress reports to appropriate TTD Leadership.
• Direct and coordinate the activities of employees engaged in the repair and maintenance of metal forming dies, such as Tool & Die Makers, Tool & Die Apprentice and Machinist. Ensures effective positive employee relations relative to performance counseling and development, as well as resolve employee issues through problem resolution.
• Confer with other supervisors to coordinate operations and activities within or between departments.
• Plan and establish work schedules, assignments, and production sequences to meet production goals.
• Inspect materials, products, or equipment to detect defects or malfunctions.
• Observe work and monitor gauges, dials, and other indicators to ensure that operators conform to production or processing standards.
• Conduct employee training in equipment operations or work and safety procedures or assign employee training to experienced workers.
• Interpret specifications, blueprints, job orders, and company policies and procedures for workers.
• Read, track and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs.
• Other duties as assigned by the immediate supervisor and/or other TTD Leadership.
• Stop production if unsafe parts, actions or poor-quality conditions exist.

Come Join the Toledo Tool & Die Team!
Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Press Operators to our team to support our continued growth.
This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 3rd shift Sunday - Thursday 10:00 PM - 6:00 AM

*Must be available to work overtime (daily, weekends & some holidays) *WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $17.00/hour
• $1.00 shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Full benefits

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITES:

• Start machines, monitor their operation to ensure it is processing properly, and record operational data for material tracking and record number of pieces produced with other documentation to run the machine.
• Operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal material.
• Load work pieces into machines.
• Examine and inspect completed work pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
• Read production schedules to determine specifications, such as materials to be used to be compliant with customer specifications relative to dimensions and tolerances.
• Verify and document dimensions of finished parts for conformance to specifications, using measuring instruments, including but not limited to calipers, gauge blocks, micrometers, and dial indicators.
• Assist in completing simple to intermediate tasks associated with coil and die changes.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Come Join the Toledo Tool & Die Team!
Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Press Operators to our team to support our continued growth.
This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 2nd shift Monday - Friday 2:00 PM - 10:00 PM

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $17.00/hour
• $1.50 shift premium (2nd shift)
• Weekly pay
• 9 paid holidays
• Full benefits

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITES:

• Start machines, monitor their operation to ensure it is processing properly, and record operational data for material tracking and record number of pieces produced with other documentation to run the machine.
• Operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal material.
• Load work pieces into machines.
• Examine and inspect completed work pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
• Read production schedules to determine specifications, such as materials to be used to be compliant with customer specifications relative to dimensions and tolerances.
• Verify and document dimensions of finished parts for conformance to specifications, using measuring instruments, including but not limited to calipers, gauge blocks, micrometers, and dial indicators.
• Assist in completing simple to intermediate tasks associated with coil and die changes.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Press Operators to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 1st shift Monday - Friday 6:00 AM - 2:00 PM

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $17.00/hour
• Weekly pay
• 10 paid holidays
• Full benefits

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITES:

• Start machines, monitor their operation to ensure it is processing properly, and record operational data for material tracking and record number of pieces produced with other documentation to run the machine.
• Operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal material.
• Load work pieces into machines.
• Examine and inspect completed work pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
• Read production schedules to determine specifications, such as materials to be used to be compliant with customer specifications relative to dimensions and tolerances.
• Verify and document dimensions of finished parts for conformance to specifications, using measuring instruments, including but not limited to calipers, gauge blocks, micrometers, and dial indicators.
• Assist in completing simple to intermediate tasks associated with coil and die changes.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding a EHS Manager to our team to support our continued growth.

This is a full-time position based at our corporate facility in Toledo, OH. We offer competitive wages, growth opportunities, and a clean, safe work environment.

*Must be willing to travel to our 3 facilities in Toledo, OH and 1 in Pioneer, OH. *

*Flexibility to shift hours as needed to meet business needs*

JOB SUMMARY

Review, evaluate, and analyze work environments and design programs and procedures to control, eliminate, and prevent disease or injury caused by mechanical, chemical, physical agents or ergonomic factors. Conduct inspections, educate and enforce adherence to laws and regulations governing the health and safety of individuals

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Competitive Pay
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

ESSTENTIAL JOB FUNCTIONS

• Order suspension of activities that pose threats to workers' health or safety.
• Investigate accidents to identify causes or to determine how such accidents might be prevented in the future.
• Recommend measures to help protect workers from potentially hazardous work methods, processes, or materials.
• Inspect or evaluate workplace environments, equipment, or practices to ensure compliance with safety standards and government regulations and implement permanent corrective action as required.
• Conduct required annual safety training requirements with the affected workforce to meet federal, state and/or local guidelines.
• Maintain Hazardous Communications Program, Emergency Action Plan, Lock Out/Tag Out, Contractor Safety, Hearing Conservation Program, etc.
• Collaborate with engineers or physicians to institute control or remedial measures for hazardous or potentially hazardous conditions or equipment.
• Use positive employee relations to effectively interact with all individuals in the organization, as well as customers, vendors and the public.
• Manage Workers’ Compensation program.
• Maintain the plant’s first-aid program. Provides first aid treatment of on-the-job illness or injury. Sees that properly trained persons are available to render first –aid on other shifts. Maintains first aid treatment records, reports and standing orders.
• Develop and maintain a diverse and effective Safety Committee.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Requirements

• Minimum of five (5) years of progressive and increasing experience in the Industrial Hygiene field preferably in a manufacturing environment.
• Preferred bachelor’s degree in Industrial Hygiene or equivalent professional experience (COSS – Certified Occupational Safety Specialist).
• Strong organizational and communication skills
• Flexibility to shift hours as needed to meet business needs

Toledo Tool & Die is an equal opportunity employer.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker Apprentices to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 1st shift Monday – Friday 6:00AM – 2:00PM
• 2nd shift Monday – Friday 2:00PM – 10:00PM
• 3rd shift Sunday - Thursday 10:00PM - 6:00 AM

*Must be available to work overtime (daily, weekend & some holidays) *

*Subject to shift rotation every 6 months to gain experience to different leaders*

*Shift subject to change once apprenticeship is complete*

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay $20/hour *See Wage Schedule below*
• $1.50 shift premium (2nd shift)
• $1.00 shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITES:

• Learn to troubleshoot and repair dies in the press and/or on the bench
• Progress as outlined in the apprenticeship program
• Brainstorm improvements in tooling and in all plant processes
• Learn to set up and operate tool room equipment including drill press, drill lathe, mill and grinder
• Assist with die setting activities
• Take direction from manager, leader and experienced tool & die co-workers and acquire skills for each 1000-hour assessment
• Assist the organization in implementation of continuous improvement activities
• Responsible for completing all required documentation (paperwork, and computer) including last-off reports, die maintenance reports, mis-hit reports, etc.
• Responsible for the safety, cleanliness and orderliness of the tool room and at presses when performing work
• Learn to remove, repair and install all die sections that have been damaged or are dull, and verify that work has been done correctly.
• Maintain a clean and safe work area, supporting 5S, health & safety and environmental initiatives.
• Ensure the company policies and procedures are adhered to including IATF:2016 and employee handbook.
• Follows safety regulations and policies, including wearing required Personal Protective Equipment (P.P.E.)
• Participates in continuous improvement activities, submits cost saving improvement suggestions, etc.
• Performs all other duties as assigned by the immediate supervisor and/or manager.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker to our team to support our continued growth.

Come join our team! Hours for this position are typically:

• Monday - Friday 6:00am-2:00pm

*Must be available to work overtime (daily, weekends & some holidays) *

Job Summary

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

Summary of Essential Job Functions

• Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
• Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.
• Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
• Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
• File, grind, shim, and adjust different parts to properly fit them together.
• Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.
• Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
• Inspect finished dies for smoothness, contour conformity, and defects.
• Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
• Perform other assignments as directed by your immediate supervisor and/or TTD Leadership.
• Stop production if unsafe parts, actions or poor-quality conditions exist.

Minimum Requirements

• High School diploma or equivalent though graduation from a technical school is preferred.
• Complete a certified Apprenticeship program whereby the employee can demonstrate experience using various tools, including but not limited to knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Must be able to read and interpret drawings, follow routers, use simple math to perform basic calculations, and use basic handheld measuring tools.

Abilities Required

• Must be able to stand, stoop, kneel, crouch or climb for extended periods of time.
• Must be able to lift/push/pull objects that are up to 50 pounds.

Toledo Tool & Die is an equal opportunity employer.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker to our team to support our continued growth.

Come join our team! Hours for this position are typically:

• Monday - Friday 2:00pm-10:00pm

*Must be available to work overtime (daily, weekends & some holidays) *

Job Summary

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

Summary of Essential Job Functions

• Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
• Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.
• Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
• Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
• File, grind, shim, and adjust different parts to properly fit them together.
• Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.
• Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
• Inspect finished dies for smoothness, contour conformity, and defects.
• Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
• Perform other assignments as directed by your immediate supervisor and/or TTD Leadership.
• Stop production if unsafe parts, actions or poor-quality conditions exist.

Minimum Requirements

• High School diploma or equivalent though graduation from a technical school is preferred.
• Complete a certified Apprenticeship program whereby the employee can demonstrate experience using various tools, including but not limited to knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Must be able to read and interpret drawings, follow routers, use simple math to perform basic calculations, and use basic handheld measuring tools.

Abilities Required

• Must be able to stand, stoop, kneel, crouch or climb for extended periods of time.
• Must be able to lift/push/pull objects that are up to 50 pounds.

Toledo Tool & Die is an equal opportunity employer.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker to our team to support our continued growth.

Come join our team! Hours for this position are typically:

• Sunday - Thursday 10:00pm-6:00am

*Must be available to work overtime (daily, weekends & some holidays) *

Job Summary

Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.

Summary of Essential Job Functions

• Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
• Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.
• Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
• Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
• File, grind, shim, and adjust different parts to properly fit them together.
• Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.
• Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
• Inspect finished dies for smoothness, contour conformity, and defects.
• Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
• Perform other assignments as directed by your immediate supervisor and/or TTD Leadership.
• Stop production if unsafe parts, actions or poor-quality conditions exist.

Minimum Requirements

• High School diploma or equivalent though graduation from a technical school is preferred.
• Complete a certified Apprenticeship program whereby the employee can demonstrate experience using various tools, including but not limited to knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Must be able to read and interpret drawings, follow routers, use simple math to perform basic calculations, and use basic handheld measuring tools.

Abilities Required

• Must be able to stand, stoop, kneel, crouch or climb for extended periods of time.
• Must be able to lift/push/pull objects that are up to 50 pounds.

Toledo Tool & Die is an equal opportunity employer.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Sorters to our team to support our continued growth.

This is a full-time position based in Pioneer, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our 3rd shift team! Hours for this position are typically:

• Sunday - Thursday 10:00PM - 6:00 AM

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $17.00/hour
• $1.00 shift premium
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• You are mechanically inclined.
• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES:

• Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
• Monitor productions operations or equipment to ensure conformance to specifications, making necessary process or assembly adjustments.
• Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers.
• Mark items with details, such as grade or acceptance-rejection status.
• Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities and inspected or graded.
• Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
• Discard or reject products, materials, or equipment not meeting specifications.
• Stack or arrange tested products for further processing, shipping, or packaging.
• Weigh materials, products, containers, or samples to verify weights or ingredient quantities.
• Maintain records of daily data communication transactions, problems and remedial actions taken, or installation activities.
• Notify supervisors or other personnel of production problems
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding a Training Specialist to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 1st shift Monday-Friday 7:00am - 3:00pm

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Weekly pay
• 10 paid holidays
• Full benefits

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a manufacturing setting is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

ESSENTIAL JOB FUNCTIONS:

· Plans, organizes, and effectively conducts employee training on various skills, policies, procedures, and compliance areas.

· Assesses training and development needs through frequent communication with managers, supervisors, and human resources.

· Researches and identifies areas in which training is required and/or beneficial.

· Evaluates and modifies existing or proposed programs; suggests and implements suitable changes.

· Develops unique training programs to fulfill workers’ specific needs to maintain or improve job skills.

· Collaborates with outside consultants and training providers to deliver training.

· Administers, scores, and logs results of qualification, learning assessment; and arranges retraining or other appropriate action for insufficient scores.

· Facilitates delivery of training by reserving and setting up needed audiovisual equipment and training rooms; scheduling training times with attendees; preparing and distributing training aids such as handouts; and performing other related tasks.

· Performs other related duties, as required.

EDUCATION & EXPERIENCE:

· Degree in related field; OR a minimum of 2 years of a combination of education, training, and experience in the related field - strongly preferred.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding a 2nd Shift Maintenance Technician to our team to support our continued growth.

This is a full-time position based in Toledo, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our 2nd shift team! Hours for this position are typically:

• Monday - Friday, 1:45pm - 10:00pm

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $32-$38 per hour depending on experience
• Weekly pay
• 10 paid holidays
• Full benefits

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Prior experience as a Maintenance Technician in a manufacturing setting
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

REQUIREMENTS:

• Must be at least 18 years of age.
• High School Diploma or equivalent.
• Eligible to work in the United States.
• Must be able to satisfactorily complete pre-employment screening (background check and drug screen).
• Identified candidates must be able to work overtime (daily, weekends and holidays).
• Experience in industrial maintenance
• 5+ years of progressive industrial experience in the following; electronics, hydraulics, pneumatics, mechanical and industrial skills.
• Must be able to work in a dynamic and fast paced environment.
• Report to work on time to support production startup.
• Possess good physical stamina and coordination.
• Must be able to stand, stoop, kneel, crouch or climb for extended periods of time.
• Must be able to lift/push/pull objects that are up to 50 pounds.
• Work as a team, good communication skills, basic math skills, physical dexterity.
• Must have valid drivers' license

KEY RESPONSIBILITES:

• Perform simple-to-complex duties to install and maintain production machines and the plant’s equipment.
• Provide assistance for emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
• Perform electrical duties including, but not limited to PLCs, reading and interpreting electrical drawings and schematics; Working with 120v, 220v, 480v and 13.8k volt circuits; Installing/repairing and trouble-shooting starters, relays, switches, proximity circuits, variable frequency drives (VFD), contactors and input/output circuits.
• Perform mechanical tasks including, but not limited to, mechanical, pneumatic, hydraulic, troubleshooting and repair of production machines.
• Read and interpret equipment manuals and work orders to perform required maintenance and service.
• Perform simple machinist duties and responsibilities.
• Perform simple to complex fabrication projects which typically involving welding components together.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Perform a variety of plumbing maintenance and carpentry functions.
• Perform aerial tasks using a scissor lifts, baskets and booms.
• Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Detect faulty operations, defective material and report those and any unusual situations to proper supervision.
• Experience reading and interpreting Blueprints, electrical schematics and technical manuals.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Toledo Tool & Die is an equal opportunity employer.

*Must be available to work overtime (daily, weekends & some holidays)*

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Die Setter to our team to support our continued growth.

This is a full-time position based in Pioneer, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

** Looking for applicants with Die Setting experience**

Come join our team! Hours for this position are typically:

• 1st Shift: Monday-Friday 6:00am-2:00pm
• 2nd Shift: Monday-Friday 2:00pm-10:00pm
• 3rd shift: Sunday - Thursday 10:00pm - 6:00am

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $20.00/hour
• $1.50 shift premium for 2nd
• $1.00 shift premium for 3rd
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• You are mechanically inclined.
• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

SUMMARY:

Provide accurate and timely setting of progressive and/or transfer dies into power presses to process finished goods that meet or exceed customer specifications. Direct press team to assist with tasks associated with die setting to make this task as efficient as possible.

KEY RESPONSIBILITIES

• Inspect all dies before setup to ensure no foreign debris is on the top or bottom of the die.
• Remove, install, and align and progressive and/or transfer dies and material coils in mechanical power press according to specifications / instructions.
• Adjust ram stroke to specified length.
• Ensure 1st off pieces are disposed of properly in red buckets and that finished goods containers are not able to have suspect parts go into them (conveyor diversion, etc.).
• Start presses to produce finished goods and observe operations to detect malfunctions and to verify press set-up conforms to specifications and to obtain 1st piece sample(s).
• Review 1st piece samples visually for defects and then use check fixture to confirm 1st pieces are ready for quality approval.
• Call Quality Auditor for 1st piece verification and review findings with auditor.
• Inspect equipment, dies or materials to help troubleshoot and identify the cause of errors, other problems or defects.
• Complete the necessary paperwork /Plex requirements.
• May be required to operate a press when necessary.
• Provide proper training to any and all team members who are assigned to Large Press Area.
• Comply with safety regulations and maintain clean and orderly work areas.
• Authority to stop production in the event unsafe parts or conditions appear.
• Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Maintenance Apprentices to our team to support our continued growth.

This is a full-time position based in Pioneer, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 1st shift Monday – Friday 6:00AM – 2:00PM
• 2nd shift Monday – Friday 2:00PM – 10:00PM
• 3rd shift Sunday - Thursday 10:00PM - 6:00 AM

*Must be available to work overtime (daily, weekend & some holidays) *

*Subject to shift rotation every 6 months to gain experience to different leaders*

*Shift subject to change once apprenticeship is complete*

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay $23/hour *See Wage Schedule below*
• $1.50 shift premium (2nd shift)
• $1.00 shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

· Mechanically inclined

· Strong work ethic

· Positive attitude

· Consistent attendance

· Willingness and desire to learn

· Safety minded

· Prior experience with various tools, industrial machinery, equipment, and processes that are used in machinery repair.

· Basic understanding of electrical and mechanical fundamentals.

KEY RESPONSIBILITES:

· Assisting with a variety of duties, including installing equipment, maintaining mechanical systems, and repairing machines, and ensuring compliance with health and safety policies and procedures.

· Takes direction and seeks the guidance and expertise of senior level personnel and accepts training and mentoring from them.

· Assists with basic maintenance assignments involving but not limited to preventive, routine preventative maintenance of equipment, learning to maintain production equipment, performing shop duties, and construction projects as required.

· Report any defects found during preventative maintenance inspections immediately to supervisor

· Will train to install, modify, diagnose, repair, and manage electronic, industrial, computer, and control systems.

· Ensuring that industrial machinery operates efficiently and dependably.

· Assists technicians with basic maintenance such as sweeping, cleaning, and greasing.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker Apprentices to our team to support our continued growth.

This is a full-time position based in Pioneer, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• 1st shift Monday – Friday 6:00AM – 2:00PM
• 2nd shift Monday – Friday 2:00PM – 10:00PM
• 3rd shift Sunday - Thursday 10:00PM - 6:00 AM

*Must be available to work overtime (daily, weekend & some holidays) *

*Subject to shift rotation every 6 months to gain experience to different leaders*

*Shift subject to change once apprenticeship is complete*

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay $20/hour *See Wage Schedule below*
• $1.50 shift premium (2nd shift)
• $1.00 shift premium (3rd shift)
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITES:

• Learn to troubleshoot and repair dies in the press and/or on the bench
• Progress as outlined in the apprenticeship program
• Brainstorm improvements in tooling and in all plant processes
• Learn to set up and operate tool room equipment including drill press, drill lathe, mill and grinder
• Assist with die setting activities
• Take direction from manager, leader and experienced tool & die co-workers and acquire skills for each 1000-hour assessment
• Assist the organization in implementation of continuous improvement activities
• Responsible for completing all required documentation (paperwork, and computer) including last-off reports, die maintenance reports, mis-hit reports, etc.
• Responsible for the safety, cleanliness and orderliness of the tool room and at presses when performing work
• Learn to remove, repair and install all die sections that have been damaged or are dull, and verify that work has been done correctly.
• Maintain a clean and safe work area, supporting 5S, health & safety and environmental initiatives.
• Ensure the company policies and procedures are adhered to including IATF:2016 and employee handbook.
• Follows safety regulations and policies, including wearing required Personal Protective Equipment (P.P.E.)
• Participates in continuous improvement activities, submits cost saving improvement suggestions, etc.
• Performs all other duties as assigned by the immediate supervisor and/or manager.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker to our team to support our continued growth.

This is a full-time position based in Pioneer, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• Monday - Friday 2:00pm-10:00pm

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $38.00/hour (based on experience)
• $1.50 shift premium
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES

• Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.
• Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
• Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.
• Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
• Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
• File, grind, shim, and adjust different parts to properly fit them together.
• Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.
• Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
• Inspect finished dies for smoothness, contour conformity, and defects.
• Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
• Perform other assignments as directed by your immediate supervisor and/or TTD Leadership.
• Stop production if unsafe parts, actions or poor-quality conditions exist.

Come Join the Toledo Tool & Die Team!

Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio.

Toledo Tool & Die is adding Tool & Die Maker to our team to support our continued growth.

This is a full-time position based in Pioneer, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment.

Come join our team! Hours for this position are typically:

• Sunday - Thursday 10:00pm-6:00am

*Must be available to work overtime (daily, weekends & some holidays) *

WHAT TOLEDO TOOL & DIE CAN OFFER YOU:

• Starting pay of $38.00/hour (based on experience)
• $1.00 shift premium
• Weekly pay
• 10 paid holidays
• Paid Time Off
• 401k
• Full benefits (medical, dental, vision)

WHAT MAKES YOU A GREAT FIT FOR THIS POSITION:

• Previous experience in a factory is beneficial but not necessary
• Strong work ethic
• Positive attitude
• Consistent attendance
• Willingness to learn
• Safety minded

KEY RESPONSIBILITIES

• Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools.
• Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
• Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.
• Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
• Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
• File, grind, shim, and adjust different parts to properly fit them together.
• Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.
• Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
• Inspect finished dies for smoothness, contour conformity, and defects.
• Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
• Perform other assignments as directed by your immediate supervisor and/or TTD Leadership.
• Stop production if unsafe parts, actions or poor-quality conditions exist.